Updated 2022-11-20:
AMSAT-China, or CAMSAT, http://www.camsat.cn, has announced December 18 as the release date for CAS-10/XW-4. Photos of this satellite may be seen at:
https://twitter.com/bd5rv/status/1592978613204586496 and
https://twitter.com/bd5rv/status/1593693879798497285
As previously reported by ANS, CAMSAT’s CAS-10/XW-4 satellite was launched on November 12, 2022, carried on the Tianzhou 5 cargo spacecraft to the Chinese Space Station. The satellite will be active immediately upon deployment into its own 400 km orbit with an inclination of 42.9 degrees. CAS-10 carries a VHF uplink and UHF downlink linear transponder with a bandwidth of 30kHz. Downlink frequencies for VHF/UHF linear transponder 435.180 MHz, for UHF CW telemetry beacon 435.575 MHz and for GMSK telemetry 435.725 MHz. Also an uplink for the transponder 145.870 MHz have been coordinated.
[ANS thanks Michael Chen, BD5RV/4, for the above information]
Repost from ANS-317:
CAMSAT’s CAS-10 (XW-4) satellite was launched on November 12, 2022, carried on the Tianzhou 5 cargo spacecraft to the Chinese Space Station. Deployment from the Chinese Space Station is expected on or about December 15th. The satellite will be active immediately upon deployment into its own 400 km orbit with an inclination of 42.9 degrees.
CAS 10 is an 8U CubeSat approx 228x455x100mm with 12kg Mass. A follow on mission from CAS-9 and also known as Hope-4 (XW-4) Carrying a V/U Mode Linear Transponder, a UHF – CW Telemetry Beacon, a UHF – AX.25 4.8k/9.6kbps GMSK Telemetry downlink and a space camera.
CAS-10 carries a VHF uplink and UHF downlink linear transponder with a bandwidth of 30kHz. This transponder will work all day during the life cycle of the satellite, and amateur radio enthusiasts around the globe can use it for two-way radio relay communications.
CAS-10 carries a camera, and the pictures it takes are stored in the flash memory on the satellite, we have designed a simple remote control system based on DTMF, and amateur radio enthusiasts around the globe can send DTMF commands to download the camera photos.
CW beacon uses Morse code to send satellite telemetry data, which is also a feature that is widely welcomed by amateur radio enthusiasts.
Downlink frequencies for VHF/UHF linear transponder 435.180 MHz, for UHF CW telemetry beacon 435.575 MHz and for telemetry 435.725 MHz. Also an uplink for the transponder 145.870 MHz have been coordinated.
[ANS thanks Alan Kung, BA1DU, CAMSAT, for the above information]